This sensor is an intelligent security device that can transmit over a Z-wave network.
In a Z-wave network the Water sensor can work with any Z-wave main controller. Through the Z-wave network the Water sensor can send communicate with the Z-wave main controller, and Associate with other devices within the same Z-wave network.
In the communication with the Z-wave main controller, the water sensor can send messages to the Z-wave main controller, but it can not receive messages from the Z-wave main controller.
When the sensor is triggered, the LED light keeps on and the buzzer will make sound. The sensor sends messages to the Z-wave main controller at the same time, the Z-wave main controller will display the current status of water sensor. The sensor is battery powered, is small and can be installed easily and can be used with or without the extension sensor.
|Range||Minimum: 40M Indoors. 100M Outdoors line of sight.|
|Battery||3 VDC Lithium 2 Year Battery Life (approx).|
l Flood detection
l Battery specification: CR2 x 1
l Standby current: 2 uA Max current: 32 mA
l Battery life: 2 years
l Radio Protocol: Z-wave
l Radio Frequency: 921.4 mHz AU/NZ
l Wireless distance: Up to 50m outdoor, Up to 30m indoor
l Operation temper: 0-40℃
l Storage temperature: 0-60℃
l Size (D x W x H): 68mm x 68mm x 34mm
l When the alarm is triggered, the LED light flashes in the detection area.
l Easy to install with screws or sticker .
l Compatible with any Z-wave main controller.
l High sensitivity and good stability.
Black Cat Z-Wave Flood Water Leak Detector
- Brand: Black Cat
- Product Code:
- Availability: In Stock
AUD $ 64.95
- 5 or more AUD $ 61.71
- 10 or more AUD $ 58.46