This stand alone Key Pad also incororates a 125mHz EM Card Reader and can Control a
Z-Wave Relay (not included).
It is a simplified version of the WMK1 whcih does not include higher security features such as

Wiegand input/output. Cannot set as wiegand reader or standalone controller. (It's standalone only)
Door contact. Cannot connect a door contact to check the door status, closed or not.
Cannot connect external alarm.

The Keypad is a contactless EM proximity card standalone access control.
It adopts zinc-alloy case, anti-vandal and anti-explosion, 2,000 user capacity and supporting access by card, card + PIN, or PIN.
It can be installed on 86x86mm mount box.

Main Features

Pulse mode, Toggle mode
One Relay operation
Pin length: 4-8 digits
Card type: 125KHZ EM card
Block enrolment, can enrol 2000 consecutive cards within 10 seconds
Waterproof, conforms to IP67
Strong Zinc Alloy Electroplated anti-vandal case
2000 uses, supports Card, PIN, Card + PIN
Backlight keypad
12 - 30V DC
Operating temp: -40°C - +70°C
Easy installation, can install on 86*86mm box.