This stand alone Key Pad also incororates a 125mHz EM, 13.56mHz Mifare & HID Card Reader and can control a Z-Wave Relay (not included).
The Keypad is a contactless EM,-HID proximity card standalone access control.
One relay operation
Pulse mode, Toggle mode
Standalone keypad card reader
Pin length: 4-6 digits
Wiegand 26-37 bits Inout/Output
Card type: 125KHZ EM, 13.56mHz Mifare card or HID Card
Block enrolment, can enrol 2000 consecutive cards within 10 seconds
Waterproof, conforms to IP67
Strong Zinc Alloy Electroplated anti-vandal case
2000 uses, supports Card, PIN, Card + PIN
10 - 30V DC or AC operation
Operating temp: -40°C - +70°C
SAAS BK2-EMH Keypad Stand-alone Access Control
Availability: In Stock
The ZWBCL1 is an Single relay in-wall switch module which is a transceiver that is also a secu..
AUD $ 89.95
The Black Cat ZWBCL2 is an in-wall switch double relay module which is a transceiver that i..
AUD $ 89.95
2 Pole 20amp Modular Contactor 12v AC Coil - 2 Normally Open - SMC220-12V
12v AC Coil - 2 Normally ..
AUD $ 39.95
The KAS Wireless Z-Wave Door Lock offers the flexible versatility of a wireless and keyless locking ..
AUD $ 279.00
An electric strike is an access control device used for doors. It replaces the fixed strike faceplat..
AUD $ 89.00
High Reliability Miniature
240VAC Input 24VDC 6.5A Output
100% full burn in test
No load power ..
AUD $ 53.00
125 KHz Transponder Key Fob, 64bit, write-protected, material ABS.
Data Format TK4100
AUD $ 25.50
13.56mHz Transponder Card, 64bit, write-protected, material PVC, 85.60mm x 53.98mm.
10 Thin Card..
AUD $ 60.00
An electric strike is an access control device used for doors.
It replaces the fixed strike f..
AUD $ 84.95
Special power supply kit for access control 12V, 3A
Power input: AC110-240V, 50-60HZ.
AUD $ 59.95